Pressbrakes, Edging machine – Hydr. pressbrake TRUMPF TrumaBendV230

Location article

Manufacturer

Description

pressure 230 t
chamfer lenght 3000 mm
distance between columns mm
stroke 365 mm
Number of working hours 36.726 h
Control
total power requirement kW
weight of the machine ca. 17,70 t
dimensions of the machine ca. m
Operating pressure: max. 305 bar
Follow-up time: 46 ms
Safety distance: 74 mm
Connected load: 42.0 kVA
Voltage: 3x400V
Rated current: 68.0 A / 50 Hz
Pneumatics: 6 bar
Hydraulic oil quantity: 400 l
Dimensions: approx. 3.65 x W 2.00 (plus support arms) x H 3.10 m
? Pneumatic die displacement
? Hydraulic WILA tool clamping at the top and bottom
? CNC controlled crowning
? Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2
? Delem control 2D graphics
? 2 movable support arms
? Preparation of ACD angle measuring system
? New upper tool straight 28? / R1, H = 158mm, segmented, installed
? Lower tool type EV-W40 V40 / 80?, length = 6 x 500 mm, installed
? Operating manual
Optionally, the upper tool and lower tool can be purchased at an additional cost
become.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition

Date built

Machine under power