Laser cutting machine – Laserschneidmaschine (CO2): Baykal BLS-NL 2060 4kW Fiber

Location article

Manufacturer

Machine no.

Description

This BAYKAL BLS-NL 2060 4kW Laser cutting machine was manufactured in the year 2014. It is equipped with a Beckhoff CNC control unit. The machine has a laser power of 4 kW as well as a max. load capacity of 4450 kg. See PDF (EN) with technical benefits attached below.
Control Unit
Brand: Beckhoff
Model: CNC

Main drive
Laserpower: 4 kW

Workpiece
Workpiece drm over bed: 2000 mm
Workpiece drm over support: 6000 mm

Table
Table load: 4450 kg

Additional equipment
: Nesting Software LANTEK Expert Cut II / Metalix AutoNest PRO
: Nozzle Cleaning and Calibration Automatic
: Fume extractor include 1000 m 3 / h
: High performance and precision linear system Beckhoff CNC controller
: Double circulation water cooling
: Fiber optic beam yield / delivery / dosing system Windows-based operating system
: 360-degree freely rotatable, positionable CNC control panel
: Automatic pallet changer (double loading tray) with hydraulic lift, integrated motorized drive system
: Programmable auxiliary gas (air / oxygen / nitrogen) selection 1-25 bar Advanced Precitec cutting head (air with cross blowing)
: Automatic nozzle cleaning and calibration system Standard smoke extraction system, Lantek CAD / CAM system - Built-in safety systems

Machine Benefits
Technical Machine Benefits:
- Cutting head precitec procutter 2. 0
- Focusing lenses 150 mm
- Linear rails (bosch rexroth)
- Rapid traverse 115 m / min. 150 m / min
- Vector speed 165 m / min 215 m / min
- Acceleration 2. 2g (22m / s2) 3. 0 g (30m / s2)
- Absolute positioning accuracy ± 0. 02 mm ± 0. 01 mm
- Repeatability ± 0. 02 mm ± 0. 01 mm
- Programmable feed rate up to 100 m / min up to 125 m / min
- Transfer table motorized motorized - automatic exchange

Qualitative Machine Benefits:
- Baykal uses a precitec laser head, which allows for the best results and constant peak performance on the material surface of the final product.
- Thanks to the capacitive sensor, the distance between the laser head and the workpiece is constant.
- The laser head is equipped with a cassette system.
- The cutting head also includes a lens protection mirror. The mirror protects the cutting lens, thus ensuring its long life. The easy-to-replace and inexpensive protective mirror allows trouble-free operation without any problems with the lenses.
- The cutting head is equipped with a collision protection system. In the event of a collision with the workpiece, the head easily detaches to avoid further damage.
- Automatic nozzle cleaning - and adjustment / / gas control and delivery system
- The machine is equipped with an automatic gas selection system. Depending on the cutting process, the machine automatically selects and adjusts the cutting and auxiliary gases. The low- and high-pressure nitrogen, oxygen and air cutting, and auxiliary gas lines are all connected
- Twincat cnc control software for beckhoff controls pc-based control software with full cnc functionality covers the entire range of classic cnc functions
- Ipg photonics fiber laser
- The laser beam is created inside the fiber and reaches the cutting head without interruption, except for the beam coupler or switch

Condition

Date built

Machine under power