CNC machining centers – Bearbeitungszentren (universal): DMG SAUER LASERTEC 50

Location article

Manufacturer

Machine no.

Description

This DMG SAUER LASERTEC 50 5-axis laser precision machine was manufactured in the year 2010 in Germany. It is currently still in production but with direct availability. It is in a very good condition with in total 81,142 machine on hours and 14,393 cutting hours. The machine comes with a LASAG FLS 352 A laser (2011), a Keller L-CUT-1-P2-B60-V extraction system (2010) and a KKT OLB 10 SA chiller (2014). See attached the original tech specs as PDF in German.
General Data
Measurements width: 2875 mm
Measurements depth: 3440 mm
Measurements height: 2772 mm
Machine weight: 5000 kg

Movement
X-AXIS Movement: 500 mm
X-AXIS Rapid traverse: 60 m / min
Y-AXIS Movement: 500 mm
Y-AXIS Rapid traverse: 60 m / min
Z-AXIS Movement: 700 mm
Z-AXIS Rapid traverse: 30 m / min
B-AXIS Movement: -90 / +160
C-AXIS Movement: n x 360

Additional equipment
: LASAG FLS 352 A laser (2011)
: Keller L-CUT-1-P2-B60-V extraction system (2010)
: KKT OLB 10 SA chiller (2014)

Machine Benefits
Technical Machine Benefits:
- Basic machine: cnc laser precision machine / / lasertec 50 precisiontool 500 mm x 500 mm x 700 mm traverse path / / cross slide with linear drives / / vertical axis (z-axis) with linear guides and ball screw drive / / full enclosure (laser protection class 1) with 1 laser safety window / / solid machine base frame made of mineral casting / / lasag nd:yag laser fls (300 watts) / / processing head (100 mm focal length) / / motorized expander 1 - 6 times / / rod quality
- Control unit: 3d path control / / siemens 840 d solutionline
- Work table: nc swivel rotary table / / highly dynamic and precise / / with two torque motors for workpieces up to 200mm diameter / / max. Load up to 14 kg
- Work table options: ks attachment flange / / hsk-63 with radial and angular alignment for manual clamping clamping of the customer pallet 200 x 280 mm / / pallet requires an hsk-63 holder
- Camera through beam path with gooseneck led incident light source / / collision switch for processing head (3-axis acting)
- Control options: 5-axis transformation / / electronic handwheel / / programmable process gas pressure
- Mg signal light display of 4 machine statuses: "program active", "laser warning", "fault", "setup mode"
- 3d measuring probe renishaw omp 400 automatically extending
- Additional laser protection window 297 mm x 210 mm / / extraction unit with secondary filter stage / / cooling unit for laser fls and linear motors / / water-water heat exchanger
- Dmg powertools

Qualitative Machine Benefits:
- Cutting of pcd / cbn blanks in three to five axes: 10x faster compared to wire edm
- Laser cutting of pcd / cbn inserts in 2d and directly on the shank tool
- 5-axis precision machine with linear drives in x / y for > 1g acceleration
- Highly dynamic torque motors in both rotary axes (b- and c-axis)
- High positioning accuracy of ≤ 8 μm
- Ccd camera and 3d touch probe for fast set-up
- User-friendly siemens 840d solutionline with special software features
- A very good accessibility of the laser for adjustment and maintenance work

Condition

Date built

Machine under power